ANALISIS K3 PADA BAGIAN PRODUKSI MENGGUNAKAN METODE HAZARD AND OPERABILITY (HAZOP)
DOI:
https://doi.org/10.61722/jipm.v2i4.299Abstract
PT. Albasi Karanglayung Indonesia is one of the companies engaged in the wood industry to produce barecore product. Based on the collection of work accident data over a period of one year, namely in 2023, there will be eleven accidents in five accident locations, namely jumping machines, multirif machines, press crosscut machines, pull crosscut machines, press machines, and warehouses, this occurs due to several factors, namely human and machine factors. The design of recommendations or proposed improvements is carried out based on hazards (potential hazards) that occur. The Hazard And Operability method aims to overcome these problems, with the expectation of reducing the risk of work accidents in the production area of PT. Albasi Karanglayung Indonesia. Potential sources of hazard from the six potential hazard locations two of them have a high risk level, namely a press crosscut machine and a pull crosscut machine, while the rest have a medium risk level, namely jumping machines, multirif machines, press machines, and warehouses. After the analysis of the results of data processing, recommendations were found to minimize and suppress the occurrence of work accidents, namely further improving the use of PPE for workers and providing K3 training so that workers can understand the importance of safety for themselves and others around them and the holding of sanctions for those who violate the provisions.
References
Agustin, N. A., Wirawan, N. H., & Kalista, A. (2023). Analisis Penilaian Kinerja Program Keselamatan dan Kesehatan Kerja (K3) Untuk Upaya Penurunan Kecelakaan Kerja Pada Karyawan Akibat Kerja Dengan Metode Statistik Kecelakaan Kerja di PT Swabina Gatra. 2(1), 20–27.
Saputra, F., & M. Rizky Mahaputra. (2022). Building Occupational Safety and Health (K3): Analysis of the Work Environment and Work Discipline. Journal of Law, Politic and Humanities, 2(3), 105–114. https://doi.org/10.38035/jlph.v2i3.91
Agustin, N. A., Wirawan, N. H., & Kalista, A. (2023). Analisis Penilaian Kinerja Program Keselamatan dan Kesehatan Kerja (K3) Untuk Upaya Penurunan Kecelakaan Kerja Pada Karyawan Akibat Kerja Dengan Metode Statistik Kecelakaan Kerja di PT Swabina Gatra. 2(1), 20–27.
Farid, M., & Claudia Anggraini, W. (2021). ANALISIS KESELAMATAN DAN KESEHATAN KERJA (K3) MENGGUNAKAN METODE HAZARD AND OPERABILITY (STUDI KASUS. PT IGASAR). Jurnal Teknologi Dan Sistem Informasi Bisnis, 3(1), 223–227. https://doi.org/10.47233/jteksis.v3i1.218
Hakim, D. F., & Adhika, T. (2022). Analisis Keselamatan dan Kesehatan Kerja (K3) dengan Menggunakan Metode Hazard and Operability (Hazop) pada Bengkel Motor. Jurnal Syntax Admiration, 3(12), 1534–1543. https://doi.org/10.46799/jsa.v3i12.519
Izzatunisa, A., Fatmah, B., Darmawan, A., & Hidayah, A. (2021). Pengaruh Kepemimpinan Transformasional, Psychological Empowerment dan Kepribadian Terhadap Organizational Citizenship Behavior. Derivatif:Jurnal Managemen, 15(2), 329–341.
Karisma Angkasa, G., Samanhudi, D., Pembangunan, U., Veteran, N., Timur, J., Rungkut, J., & Surabaya, M. (2021). ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA(K3) DENGAN METODE HAZARD AND OPERABILITY STUDY (HAZOP) DI PT. JAWA GAS INDONESIA. In Juminten : Jurnal Manajemen Industri dan Teknologi (Vol. 02, Issue 05).
Nur Syam, A. A., Sukmono, Y., & Pawitra, T. A. (2022). Analisis Risiko Keselamatan dan Kesehatan Kerja dalam Proses Produksi Lemari dengan Metode Hazop pada UKM Rumahkayu Samarinda. JOURNAL OF INDUSTRIAL AND MANUFACTURE ENGINEERING, 6(2), 122–130. https://doi.org/10.31289/jime.v6i2.7200
Paral, M. V., Mandias, R., & Shinstya, L. A. (2022). Shift kerja dan kecelakaan kerja pada karyawan. Jurnal Skolastik Keperawatan, 8(1), 26–32.
Rahmanto, I., & Hamdy, M. I. (2022). Analisa Resiko Kecelakaan Kerja Karawang Menggunakan Metode Hazard and Operability (HAZOP) di PT PJB Services PLTU Tembilahan. Jurnal Teknologi Dan Manajemen Industri Terapan (JTMIT), 1, 53–60.
Rizqi, M., & Zakiyuddin, Z. (2022). Analysis of Tempe Tofu Home Industry Standards on Occupational Safety Health (K3) Aspects in Purwodadi Village, Kuala Pesisir District, Naga Raya Regency. Morfai Journal, 2(2), 387–396. https://doi.org/10.54443/morfai.v2i2.310
Rudyarti, E. (2022). Study of the Effectiveness of Implementing Occupational Safety and Health with the Hazop Method in the Cikarang Industrial Center. Indonesian Journal of Sport Management and Physical Education, 1(1), 59–70. https://doi.org/10.55927/ijsmpe.v1i1.2284
Saputra, F., & M. Rizky Mahaputra. (2022). Building Occupational Safety and Health (K3): Analysis of the Work Environment and Work Discipline. Journal of Law, Politic and Humanities, 2(3), 105–114. https://doi.org/10.38035/jlph.v2i3.91
Sari, S., Husna, H., Novitasari, L. A., Kirana, A. P., Munir, M. S., Zain, A. Z. L., & Tsabitah, T. A. (2022). Analysis of occupational health and safety at skin cracker factory using Hazard and Operability Study (HAZOP). Journal Industrial Servicess, 8(2), 164–169. https://doi.org/10.36055/jiss.v8i2.15537
Savitri, E. D. Y., Lestariningsih, S., & Mindhayani, I. (2021). Analisis Keselamatan Dan Kesehatan Kerja (K3) Dengan Metode Hazard And Operability Study (HAZOP) (Studi Kasus : CV. Bina Karya Utama). Jurnal Rekayasa Industri (Jri), 3(1), 51–61. https://doi.org/10.37631/jri.v3i1.291
Susanto, N., Azzahra, F., & Putra, A. H. (2022). Application of Hazard and Operability Study Methods (HAZOP) to asses and control hazard risk in spinning department using at textile industrial. IOP Conference Series: Earth and Environmental Science, 1098(1). https://doi.org/10.1088/1755-1315/1098/1/012006
Wahyudi, I., & Setiawan, I. (2023). Penerapan Just In Time Dalam Meningkatkan Efektivitas Dan Efisiensi Produksi (Suatu Studi Pada PT Albasi Priangan Lestari Kota Banjar) Enas Universitas Galuh Ciamis. Jurnal Penelitian Manajemen Dan Inovasi Riset, 1(5), 292–303. https://doi.org/10.61132/lokawati.v1i5.158
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 JURNAL ILMIAH PENELITIAN MAHASISWA
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
