ANALISIS POTENSI BAHAYA PADA STASIUN GILINGAN MENGGUNAKAN JOB SAFETY ANALYSIS (JSA) DENGAN PENDEKATAN HIRARC DI PT MADUBARU
DOI:
https://doi.org/10.61722/jipm.v4i3.2487Keywords:
Occupational Safety and Health, Job Safety Analysis, HIRARC, Milling Station, Occupational AccidentsAbstract
The growth of industrial production activities contributes to a higher likelihood of workplace accidents, especially in work environments that involve the operation of rotating equipment. PT Madubaru (PG Madukismo) is a sugar manufacturing company located in Bantul, Yogyakarta, which recorded 11 cases of medical treatment injury at the milling station during the 2024–2025 period. This research was conducted to recognize workplace hazards, evaluate occupational risk levels, and develop appropriate control strategies by applying Job Safety Analysis (JSA) combined with the HIRARC framework. Information was obtained through field observations, interviews with supervisors and operators, as well as a review of relevant literature. The results indicate that milling activities I–V have a moderate risk level due to roll entrapment hazards and slippery floor conditions caused by bagasse and juice spillage, while the initial feeding and bagasse discharge activities are classified as low risk. Risk reduction actions were determined according to the control hierarchy, encompassing technical modifications, administrative procedures, material substitution, and the utilization of personal protective equipment.
References
Abdan S, M., Wasiur Rizqi, A., & Jufriyanto, M. (2023). Efforts to Control Work Accident Risks in Steel Construction Work Using the Job Safety Analysis (JSA) Method. (Case Study at Pt. Xyz) (Vol. 20, Issue 2).
Djunaidi, M., & Umami, H. (2024a). Occupational Health and Safety Analysis Using Job Safety Analysis and Hazard Identification Risk Assessment and Risk Control Methods. E3S Web of Conferences, 517. https://doi.org/10.1051/e3sconf/202451715003
Djunaidi, M., & Umami, H. (2024b). Occupational Health and Safety Analysis Using Job Safety Analysis and Hazard Identification Risk Assessment and Risk Control Methods. E3S Web of Conferences, 517. https://doi.org/10.1051/e3sconf/202451715003
Ghasemi, F., Doosti-Irani, A., & Aghaei, H. (2023a). Applications, Shortcomings, and New Advances of Job Safety Analysis (JSA): Findings from a Systematic Review. In Safety and Health at Work (Vol. 14, Issue 2, pp. 153–162). Elsevier B.V. https://doi.org/10.1016/j.shaw.2023.03.006
Ghasemi, F., Doosti-Irani, A., & Aghaei, H. (2023b). Applications, Shortcomings, and New Advances of Job Safety Analysis (JSA): Findings from a Systematic Review. In Safety and Health at Work (Vol. 14, Issue 2, pp. 153–162). Elsevier B.V. https://doi.org/10.1016/j.shaw.2023.03.006
Hidayat, M. C., & Nuruddin, M. (2021). Analisis Identifikasi Bahaya Kecelakaan Kerja Menggunakan Job Safety Analysis (JSA) Dengan Pendekatan Hazard Identification, Risk Assessment And Risk Control (HIRARC) (Studi Kasus PT. Smelting Plan Refinery). 2 (4), 557.
Ikhsan, M. Z. (2022). Identifikasi Bahaya, Risiko Kecelakaan Kerja Dan Usulan Perbaikan Menggunakan Metode Job Safety Analysis (Jsa) (Studi Kasus: PT. Tamora Agro Lestari). In Jurnal Teknologi dan Manajemen Industri Terapan / JTMIT: Vol. X.
Laksono, T. D., & Wiyanti, D. S. (2023). Job Safety Analysis (JSA) Of Pile Foundation Work At Purbalingga Multipurpose Building Construction Project.International Journal of Engineering Technologies and Management Research, 10 (3). https://doi.org/10.29121/ijetmr.v10.i3.2023.1292
Nudin, M. I., & Andesta, D. (2025). Upaya Pencegahan Kecelakaan Kerja Menggunakan Metode Job Safety Analysis Pada Departemen Fabrikasi. In Jurnal Teknik Industri (Vol. 9, Issue 1).
Pawenrusi, E. P., & Fajrina, A. I. (2025). Analysis of Occupational Health and Safety Risk Management: Hazard Identification, Risk Assessment, and Risk Control-HIRARC for Workers at Health Quarantine Offices in Makassar, Indonesia. In International Journal of Statistics in Medical Research (Vol. 14).
Prastawa, H., Mahachandra, M., & Zaka Waly, G. (2023). Occupational Safety and Health Risk Assessment in an Electronic Manufacturing Company in Indonesia. E3S Web of Conferences, 448. https://doi.org/10.1051/e3sconf/202344801014
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 JURNAL ILMIAH PENELITIAN MAHASISWA
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
